|
Rocket List for hqtalo
Title | Rating | # | Altitude | Length | Diameter | Weight | Motor Diameter | Description | ||
| 100.0 2 users | 2 | 531ft 161.85m | 20.00" 50.80cm | 1.00" 2.54cm | 0.04lb. 18.14g | 18mm | 1:15 scale. Original Estes kit k-17. Built my first one in 1973. Excellent flying rocket with impressive altitude performance. Built at least four of these over the years because they're just too good not to have in your collection! | ||
| 2 | 19.46" 49.43cm | 0.75" 1.91cm | 0.05lb. 22.68g | 18mm-
2:12mm-T engine | 1:20 scale model of Aerobee 300 with the 1st stage Aerojet 1800 booster using an 18mm motor. The upper stage uses a standard t size motor. Finished with a silver foil wrap. | ||||
| 0 | 19.20" 48.77cm | 1.00" 2.54cm | 0.09lb. 40.82g | 18mm | Dr Zook scale kit for "the stick" or Aries 1 launch vehicle. Kit flies well and is fairly high performance with the small diameter body. Measured 350 feet on an A8-5. | ||||
| 2 | 748ft 227.99m | 14.20" 36.07cm | 0.75" 1.91cm | 0.03lb. 13.61g | 12mm-2 cluster
| Scratch built for performance. Twin cluster T motor. Payload section (BT-20 to hold Altimeter 1) mounted between the twin sustainers BT-5. | |||
| 0 | 14.00" 35.56cm | 1.60" 4.06cm | 0.17lb. 77.11g | 18mm | 1:74 scale version of the Atlas booster with a Centaur upper stage. Also have adapter to fit a mercury capsule. Capsule is the same one used on the Estes Redstone original K-41 kit. The Atlas is single 18mm motor with fake nozzles either side and clear p | ||||
| 0 | 23.00" 58.42cm | 1.32" 3.35cm | 0.27lb. 122.47g | 18mm | Estes Kit KC-5 from the Citation Line. Boost glider with slide out power pod. | ||||
| 0 | 18.50" 46.99cm | 0.73" 1.85cm | 0.04lb. 18.14g | 18mm-B6-0
| Based off on article in 1975 NAR magazine. Rocket flies in a booster coaster configuration. Canon fuse lit by ejection charge sets off small BP charge in coaster tail. Coaster is very hard to track even on a B6 motor since there is no smoke. Separation i | ||||
| 1 | 10.75" 27.31cm | 0.73" 1.85cm | 0.02lb. 9.07g | 18mm-A8-5
| High performance altitude attempt design. Hollow nose cone and small fins. Flies well but very hard to find due to its small size. | ||||
| 1 | 462ft 140.82m | 15.50" 39.37cm | 0.75" 1.91cm | 0.07lb. 31.75g | Scratch design and built for high cluster performance using 18mm motors in a side by side configuration, min diameter tubing. strap ons will blow nose cone but chute is in main body. Eccentric anamoly is the angle used by Kepler for determining TOF on ecc | ||||
| 0 | 0.16lb. 72.57g | 18mm | Estes Orbital Transport Kit K-42. Boost glider. This was a scratch built from plans with a Midway Aerospace lines decaling. | ||||||
| 0 | 28.00" 71.12cm | 1.30" 3.30cm | 0.19lb. 86.18g | 24mm | Estes Sandhawk Kit K-51 | ||||
| 0 | 20.00" 50.80cm | 0.97" 2.46cm | 0.08lb. 36.29g | 18mm-B6-2
| Semi scale futuristic design for Teledyne Ryan target drone. Original 1974 wings were further forward and design was unstable. Recently rebuilt with delta wings at the rear. The parachute is in the lower tube and ejects out the rear. | ||||
| 0 | 22.60" 57.40cm | 0.97" 2.46cm | 0.07lb. 31.75g | 18mm-B6-0
18mm-B6-6 | High performance two stage design. | ||||
| 0 | 32.00" 81.28cm | 2.00" 5.08cm | 0.78lb. 353.80g | 24mm-Composite
| Estes Kit K-1350 which is their upscale release of the original interceptor. Looks exactly the same as the smaller version, but built to fly on E motors. I found the E sluggish and marginally stable. I use an F39 composite motor so the shorter rails/rods | ||||
| 0 | 78.00" 198.12cm | 4.00" 10.16cm | 9.80lb. 4.45kg | 38mm-J429R-M
| Upscale version of the classic Estes Interceptor with 38mm motor mount. Tubes were fiberglassed for strength. Nose was custom built using plexiglass. Tailcone is fitted with allen screws to remove easily and change batteries for the LED light unit (design | ||||
| 0 | 19.25" 48.90cm | 1.63" 4.14cm | 0.17lb. 77.11g | 24mm-D15-5
| Military scale kit RK-1109 from rocketarium. Builds OK but the nosecone plastic does not hold paint. Decals were not the best quality. | ||||
| 1 | 6.50" 16.51cm | 11.88" 30.18cm | 0.60lb. 272.16g | 24mm-D12-0 24mm-F12-3j | Scale model 1/48 of the Lot in Space 1960s TV series Jupiter 2. Scratch built from balsa and card stock with the upper hull coated in very thin fiber glass. Top will come off to deploy two 16" parachutes. Landing legs are made to retract but the mechanism | ||||
| 70.0 1 users | 0 | 14.50" 36.83cm | 2.22" 5.64cm | 0.13lb. 58.97g | 18mm | Original Estes Kit scratch built from plans. | |||
| 2 | 1768ft 538.89m | 41.10" 104.39cm | 1.63" 4.14cm | 0.65lb. 294.84g | 24mm-E motor
24mm-E motor 24mm-E motor | Scratch design and built for E cluster performance and dual deploy using min diameter for a stratologger. Charge cups are expended T casings. Lunar Libration is the apparent motion of the moon (wobbling) that allows us to see 58% of the face. Since Librat | |||
| 90.0 1 users | 1 | 21.70" 55.12cm | 0.95" 2.41cm | 0.14lb. 63.50g | 18mm | Original Estes K-43 Kit scratch built from plans. The plans are in Black and White so I had to guess on the paint scheme! Great flyer on B and C motors despite the large base drag. | |||
| 0 | 28.00" 71.12cm | 1.60" 4.06cm | 0.17lb. 77.11g | 18mm | 1:71 Scale original Estes Kit K-41. Scratch built from plans in 2006. The mercury capsule is interchangeable with my Atlas Booster so I changed the decaling to read Freedom 7 instead of Friendship 7. The capsule has an independent 8 inch chute tied at the | ||||
| 1 | 789ft 240.49m | 65.00" 165.10cm | 2.50" 6.35cm | 1.29lb. 0.59kg | 29mm-G motor
| Scratch design and built for G motor performance. Used too much fiber glasson fins and boat tailso it's strong, but heavy. Usually fish tails on the way up for first 200 feet. Modified later as a dual deployment. Uses both standard spherical parachute or | |||
| 0 | 23.00" 58.42cm | 1.63" 4.14cm | 0.19lb. 86.18g | 18mm-2 C6-3
| 1:53 Scale boost glider. Booster uses two 18mm motors in a BT 60 tube. While the canard mid tube is present it isn't functional. I added a canard close to the nose to get the model to fly vertical during boost. Even so it arcs over and ends up horizontal | ||||
| 0 | 19.75" 50.17cm | 0.73" 1.85cm | 0.10lb. 45.36g | 18mm-B6-4
| Estes Kit K-34 Boost glider. Painted in School colors for the Madison High School Warhawks. Built in 1974. The pod takes a beating so its been rebuilt a few times. | ||||
| 0 | 32.00" 81.28cm | 1.60" 4.06cm | 0.45lb. 204.12g | 24mm-D12-0
2:24mm-D12-7 | Original Estes Kit K-52 built in 1974 and still flying. Nose section was modified to hold a transponder beacon in the nose cone and an HD video camera in the payload section. Look is that of the original Cineroc. Modified the first stage with a small hole | ||||
| 1 | 1024ft 312.12m | 32.00" 81.28cm | 1.60" 4.06cm | 0.18lb. 81.65g | 18mm-Cluster of 3
| Estes original 3 cluster rocket with payload section. Kit K-6. Built 1974. Flies to 1,024 feet on 3 C6-7s. Same profile as the Big Bertha. | |||
| 1 | 219ft 66.75m | 10.00" 25.40cm | 0.75" 1.91cm | 0.06lb. 27.22g | 12mm | Smaller scale version of the Mercury Redstone for T sized engines. Flies straight. Scratch built in 2010. | |||
| 0 | 23.75" 60.33cm | 0.97" 2.46cm | 1.29lb. 0.59kg | 18mm-B6-6
18mm-B6-0 18mm-B6-2 18mm-B6-2 | Scratch built. Designed in 1974 as a high performance model. Cluster of three engines in lower stage. Lower stage strap-ons have parachutes. Upper stage includes stand-off launch lug so that BT-55 payload section can be used. | ||||
| 1 | 37.00" 93.98cm | 3.93" 9.98cm | 0.62lb. 281.23g | 18mm 18mm 18mm 18mm 24mm-D12-3 | Built from Semroc plans and ebiz rocket parts. Good flier and light enough for a single D12 motor. | ||||
| 1 | 43.50" 110.49cm | 3.93" 9.98cm | 0.62lb. 281.23g | 18mm 18mm 18mm | 50th Anniversary kit. Flies well with straight up flight. Flew with launch tower. The harness arrangement on the upper stage prevents damage to the escape tower. | ||||
| 0 | 28.00" 71.12cm | 1.00" 2.54cm | 0.13lb. 58.97g | 18mm 2:18mm | Estes Shrike kit K-46. Scratch built from plans in 2014. The Estes version has 4 fins but gives very good performance. Consistently flies to 1,323 feet on C6-0 to C6-7. | ||||
| 2 | 867ft 264.26m | 10.80" 27.43cm | 0.73" 1.85cm | 0.03lb. 13.61g | 12mm-T Motor
2:12mm-T Motor | Two stage T motor sport rocket scratch designed and built for performance. Sidereal time is how time is truly measured in astronautical engineering from each 360 rotation about the K axis through the first point of aries. Seemed like a good name for a 2 s | |||
| 90.0 1 users | 0 | 66.50" 168.91cm | 4.00" 10.16cm | 2.75lb. 1.25kg | 38mm | My selection for L-1 and L-2 cert. I fiberglassed the fins and fin joints for added strength. The payload compartment has an internal tube to hold an Alt15K altimeter. I added an ebay for J - Dual Deployment flights and added a mount for the video camera. | |||
| 0 | 49.60" 125.98cm | 1.50" 3.81cm | 1.10lb. 498.95g | 38mm-H148R-M
| Not a true upscale but it does resemble the original Estes Starlight. Built as a min diameter 38 mm H motor dual deploy. Nose cone is hollow and contains internal tube for transponder. | ||||
| 0 | 32.50" 82.55cm | 1.63" 4.14cm | 0.38lb. 172.37g | 24mm-D12-3
| Estes kit 2036. Won in a raffle but was missing many parts. Modified the landing struts to be functional with rubber band shock absorbers. Flies well. | ||||
| 0 | 15.50" 39.37cm | 2.21" 5.61cm | 0.25lb. 113.40g | 24mm-D12-5
| Custom design scratch built. Owl shaped rocket to rival the "pigasus." Painted in Origami Owl teal I built this model so my wife would have something to fly if she ever came out to a launch. Flies straight and very stable. | ||||
| 1 | 11.20" 28.45cm | 1.32" 3.35cm | 0.08lb. 36.29g | 18mm | Estes Kit K-22. Painted in Late White sands scheme. Built in 1972. I have gone through 5 of these models and currently building 2 more. Despite the appearance they fly well, and are easy to lose in tall grass. The body tube is big enough for an alarm soni | ||||
| 0 | 22.50" 57.15cm | 2.62" 6.65cm | 0.41lb. 185.97g | 24mm-D12-3
| Kit 3228 Scale model painted as late white sands rocket 55.Builds very and finishes very nice. | ||||
| 90.0 1 users | 0 | 11.80" 29.97cm | 0.74" 1.88cm | 0.04lb. 18.14g | 18mm | Original Estes Kit K-11 built in 1972. I have other version with a mid body tube separation in an attempt to get more altitude. My model is 11g empty and will get 925 feet on a B6-6. Good flier but small and too narrow for sonics. | |||
| 0 | 18.00" 45.72cm | 3.00" 7.62cm | 24mm | Scratch built North American X-15. Through the wall fins and 24mm mount designed for E motors. Flew better with F39. Rocket was lost when it nosed over and flew horizontal at an alt of 200 feet into a wooded area. |